Insulprime is suitable for either interior or exterior use over timber, brick, masonry*, Gyprock, ceramic tiles, galvanised iron, previously painted steel, vinyl, laminate, aluminium, Colorbond and gloss enamel surfaces after correct preparation. (Note: Bare steel requires a suitable metal primer, before applying Insulprime)
(Do not use Insulprime on Tilt UP Panels as the new panels have a rubber like residue. The panels need at least a six month weathering. *In areas of substantial rainfall it is preferable to use our RP Primer on masonry)
PROPERTIES
Colour White, may be tinted.
Coverage Approximately 16 sq.mtrs to 1 litre
Drying time Dry to touch – 30 minutes (25°C & 50% RH)
Recoat 1 hour @ 25°C. Drying time may be longer in damp, cool or humid conditions.
Volume Solids 35%
Film Thickness Wet – 60 microns Dry - 22 microns
Clean up Water
Thinning May be thinned by adding water. In hot dry conditions 100mls may be added per 1 litre of Insulprime for ease of application.
APPLICATION
DATA By brush, roller or spray*
Stir well with a broad flat paddle before using.
Do not apply if temperature is below 10°C or likely to drop below 10°C whilst drying. Do not apply if rain is imminent or in hot dry conditions.
*Spray: Suitable most spray equipment. Observe local Regulations
STORAGE
Protect from heat and frost.
Ideal storage conditions are in the shade at ambient temperature between 10°C and 25°C.